| |
|
Baked
Enamel Toilet Enclosures
(FP-500 Overhead Braced) - In
Stock |
 |
|
|
| |
|
Materials:
|
|
| |
Bonderized,
galvanized steel |
| |
|
Thickness:
|
|
| |
|
Doors:
22 Gauge, Finished to 1" (25.4mm) |
|
| |
|
Panels:
20 Gauge, Finished to 1" (25.4mm) |
|
| |
|
Pilasters:
20 Gauge, Finished to 1 ¼" (31.75mm) |
|
| |
|
Construction: |
|
| |
|
Doors:
|
|
| |
|
·
Finished to 1" (25.4) thick |
|
| |
|
·
Is constructed of two sheets of 22-gauge, galvanized,
bonderized steel, formed and cemented under pressure to
a honeycomb core. |
|
| |
|
·
Door face sheets are welded at intervals around the entire
perimeter. |
|
| |
|
·
All edged to be finished with a 20-gauge interlocking
molding. |
|
| |
|
·
Corners are finished with pre-formed painted stainless
steel (type 304) reinforcements. |
|
| |
|
·
Corners are to be welded internally to ensure that galvanized
rust resistant coating is not removed. |
|
| |
|
·
Doors have internal steel reinforcements to secure hardware
items. |
|
| |
|
Panels: |
|
| |
|
· Finished
to 1" (25.4) thick |
|
| |
|
·
Constructed of 2 sheets of 20-gauge, galvanized, bonderized
steel, formed and cemented under pressure to honeycomb
core. |
|
| |
|
·
All partition edges are finished with a 20-gauge interlocking
molding. |
|
| |
|
·
Corners are finished with a pre-formed painted stainless
steel (type 304) reinforcements. |
|
| |
|
Pilasters: |
|
| |
|
· Finished
to 1 ¼" (31.75) thick |
|
| |
|
·
Constructed of two sheets of 20-gauge, galvanized, bonderized
steel, formed and assembled with a honeycomb core. |
|
| |
|
·
Face sheets are electrically welded at intervals around
the entire perimeter. |
|
| |
|
·
All pilasters will have a 3" (76.2) high #4 finish stainless
steel plinth (type 304) and have straight, flat sides
with rounded edges to match the pilaster profile. |
|
| |
|
·
Pilasters will have leveling bolts threaded to the pilaster
support bracket |
|
| |
|
·
Floor mounting will be with #12x 2 ½ (63.5) screws and
shield |
|
| |
|
·
Head-rail is anodized aluminum 0.050 (1.27) wall thickness
with an anti-grip profile. |
|
| |
|
·
The head-rail is set into a 16ga.channel reinforcement
that occupies the full width of the pilaster and is electrically
welded in place for maximum strength. |
|
| |
|
Fittings: |
|
| |
|
·
Wall fittings are anodized aluminum .125" (3.175) wall
thickness |
|
| |
|
·
Minimum of two fittings at each connection. |
|
| |
|
Hardware: |
|
| |
|
·
Each compartment will be complete with all hardware, door
hinges, latch, stop and keeper, coat hook, as well as
all necessary fittings and fastenings for complete installation.
|
|
| |
|
·
Hinges and door strikes are fastened by means of tamperproof
through bolts of the sex bolt type, which are polished
chrome plated. All other screws to be chrome plated. |
|
| |
|
·
Doors are to be hung on a concealed, "stay-set" fully
adjustable, non-rising door mechanism. |
|
| |
|
·
Upper hinge pin shall be 3/8" (9.525) diameter steel.
|
|
| |
|
·
All hinges will have wraparound flanges with a minimum
of 5/8" (15.875) wrap onto pilaster. |
|
| |
|
·
All doors will have a concealed ADA approved slide latch
with external "in-use" indicator. |
|
| |
|
Finish: |
|
| |
|
·
All rust inhibitive-coated material shall be chemically
cleaned and painted with multiple coats of Epoxy Hybrid
Powder applied electrostatically. |
|
| |
|
Powder
Coat Epoxy: |
|
| |
|
·
The galvanized, bonderized steel provides additional adhesion
benefits to the powder shield coatings. |
|
| |
|
·
Powder Coat Epoxy is 30% harder and 300% more resistant
to humidity and salt spray then enamel paints. |
|
| |
|
·
Test results show it provides an easy to clean surface,
suitable for all commercial and industrial environments. |
|
| |
|
Stock
Colors : |
|
| |
|
·
500 Desert Tan |
|
| |
|
·
700 Gray Dawn |
|
| |
|
Factory Colors: |
|
| |
|
15 additional colors are
available. |
|
